Water Equipment Brands
Categories
- 88Well System Parts & Installation Supplies
- Featured Areas
- 121New Products
- 397Specials
- 14Water Softeners & Conditioners +
- Browse Store
- 16Clearance & Close-Outs
- 35Chemicals & Cleaners
- 22Coolers & Water Bottles
- 8Under Counter Filter Systems
- 40Distillers Water & Essential Oils +
- 1Counter Top Drinking Water Systems
- 198Fittings +
- 28Installation Supplies +
- 5Iron, Manganese & H2S Filter Parts
- 10Leak Detection & Prevention
- 22Media - Bulk
- 45O-Rings
- 5Ozone Systems and Parts
- 28Pressure Tanks
- 42Pump Control Boxes & Drives +
- 71Pump Parts All - Jet & Submersible +
- 26Pumps - Booster, Demand, Delivery
- 10Pumps Jet
- 40Pumps Submersible
- 5Pumps Sump
- 216Reverse Osmosis Replacement Parts +
- 12Reverse Osmosis Systems
- 32Rusco Spin-Down & Trapper Sediment Filters +
- 9Shower Filters & Accessories
- 27Taps & Faucets
- 33Testing Equipment & Supplies
- 20Tools
- 55UV Light Sterilizers +
- 340UV Replacement Parts +
- 51Water Filter Housing Parts
- 70Water Filter Housings & Kits
- 323Water Filters +
- 46Water Filters 20" Standard
- 182Water Filters Big Blue +
- 22Water Filters Hurricane-Jumbo +
- 199Water Softener Parts +
- 5Water Testing
- 8Whole-House Self-Cleaning Systems
Limited Time Sale!
Happy Customers Since 1989
Product Details
|
Float Switch Pump-Up or Pump-Down 115V-1/2hp, 230v-1/2 to 1hp, Corded 20ft
SKU: SJE-20SGMSPDTWE
|
Overview
Pump Up or Down - 20ft Corded Float Switch, works with 115volt 13hp to 1/2hp motors and 230volt 1/2hp hp to 1hp motors
Mechanically-activated switch, narrow-angle float switch designed to activate pressure switches, pump controls, panels and alarms. This narrow-angle sensing device is used to accurately monitor liquid levels in Potable Water, Water, and Sewage applications. The SJE SignalMaster® SPDT control switch can be wired to work in either direction. Pump-up or pump-down, normally open or normally closed applications. It is not sensitive to rotation.
When wired as Normally Open (high level)
The control switch turns on (closes) when the float tips slightly above horizontal signaling a high level, and turns off (opens) when the float drops slightly below horizontal.
When wired as Normally Closed (low level)
The control switch turns on (closes) when the float tips slightly below horizontal signaling a low level, and turns off (opens) when the float tips slightly above horizontal.
Features:
- NSF Standard 61 protocol approved by Water Quality Association
- Can be wired to work in either normally open or normally closed applications (Single Pole, Double Throw)
- Mechanically-activated, snap action contacts
- High impact, corrosion resistant, polypropylene float housing
- Float not sensitive to rotation
- Control differential of 1.5 inches (4 cm) above or below horizontal
- Green colored cap for easy identification of SPDT control switch
- UL Listed for use in water and sewage
- CSA Certified
- SJE Pump Up/Down (115v Maximum 1/2 HP) or (230v Maximum 1 HP) Float Switch (20' Cord)
- Part Number - 1004838
- Model Number - SJE-20SGMSPDTWE
Specifications:
- Cable: Flexible 18 gauge, 3 conductor (UL, CSA) SJOW, water-resistant (CPE)
- Float: 2.74 inch diameter x 4.83 inch long (7.0 x 12.3 cm) high impact, corrosion resistant, PVC housing for use in sewage and water up to 140°F (60°C)
- Maximum Depth: 20 feet (9meters), 13 psi (90 kPa)
- Electrical: 5 amp, 125.250 VAC, 50/60 Hz
Note: This switch is not recommended for controlling: Electric loads less than 100 milliamps, 12 VAC, Non-arcing electric loads
Click here for the manufactures spec sheet and sales brochure