Calefactio 3/4" Stainless Steel 10GPM Flow Control Valve

Flow regulators are used to maintain a defined flow rate regard­less of pressure variations of the supply line. Precise flow control improves system performance and in the case of plumbing systems, it provides comfort of use at low pressure as well as water and energy saving at high pressure. When there is no flow or pressure, the o­ring is relaxed. When there is normal pressure, the o­ring subjected to the line pressure is compressed into the seating area. As the pressure increases, the o­ring is compressed further into the seating area. As the pressure decreases, the o­ring relaxes. Since the flow rate for a given orifice changes to the square root of delta P, the o­ring deformation is equal to this thus giving a constant flow over a wide range of pressure variations.

Flow Tolerance refers to the deviation from Nominal Flow tolerated across the pressure range once the threshold pressure is reached. In general the flow tolerance is +/­ 15%.

Working Conditions refers to the usual parameters of the application such as medium (usually drinking water), pressure range (usually 0 to 150 PSI) and temperature range (usually 40 to 150°F).

Threshold Pressure refers to the pressure at which the flow regulator effectively begins controlling the flow. Standard regulators begin controlling at 15 PSI.

Features

• Water flow to an 10 GPM maximum flow rate
• 3/4" female normal pipe thread openings on both ends
• Threashold Pressure: 15 PSI
• Working Pressure: 0 to 125 PSI
• Maximum Working Tempature: 150F/65.5
• Certified by CSA with the norms NSF/ANSI 61 & NSF/ANSI 372 LLC
• Part Number: SSC10.00, FC-C10.00 or GC-10.0
• Manufactured by Calefactio
• Made in North America

Click Here to download manufacturer spec sheet

Note: Flow control valves have a directional flow to them which is marked on the valve body with an arrow, please make note of this during installation to ensure a long life and accurate flow rate.