Pentek 10" PCF1-10MB Deionization Water Filter

The PCF Series cartridges have been developed in response to the requirements for deionized water in many industries. They are manufactured using an FDA-compliant resin that has been subjected to additional post-production steps to minimize the total organic carbon (TOC) level. This high capacity, semi-conductor-grade resin cartridges are ideal for use in pharmaceutical and medical laboratories, cosmetics and circuit board printing applications.

Features:

•  FDA D.I Resin Mixed Bed Deionization Water Filter Cartridges
• Pentek PCF1-10MB filters are designed for deionizing water up to 16 megohms
• Manufactured using an FDA-compliant resin that has been subjected to additional postproduction steps to minimize the total organic carbon (TOC) level.
• High-capacity, semi-conductor-grade resin cartridges are ideal for use in pharmaceutical and medical laboratories, cosmetics, and circuit board printing applications.
• Convenient and cost effective for many applications where low levels of total organic carbon (TOC) and total dissolved solids (TDS) are required.
• PCF Series cartridges have been developed in response to the requirements for deionized water in many industries.

• Commercial and Industrial Applications for Deionization Water Filters:
• Circuit board printing
• Pharmaceutical use
• Steam and humidification
• Cosmetics
• Steam processors
• Humidification systems
• Recirculating/cooling towers
• Power generating equipment
• Medical/laboratory use
• Lasers
• Jet water sprayers
• Boiler make-up water
• Aquariums

Specifications:

• Dimensions: 9-3/4" x 2-2/3"
  
• Capacity Grains (mg TDS as CaCO3): 270 (17,500)
• Suggested Flow Rate: 0.25 gpm (0.95 L/min)
• Temperature Rating: 40°F to 100°F (4.4°C to 37.8°C)
  
• Part # 155273-43