Pentek/Pentair EPM-10 Carbon Water Filter for reverse osmosis systems and standard 10" filter housings

Pentek EPM Series Cartridges are a modified version of our EP Series Cartridge. This cartridge suitable for taste, odor and chlorine taste & odor reduction, as well as sediment filtration. EPM Series Cartridges are manufactured using a process that yields a cartridge with a nominal 10-micron filtration rating, high porosity and chlorine taste & odor reduction. The high porosity design helps prevent the cartridge from plugging before its adsorption capability is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop. These cartridges are protected by an outer wrap designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges.

Features:

• Dimensions: 9-3/4" x 2-7/8" (248 mm x 73 mm)
• Micron Rating (Nominal): 10 Micron
• Temperature Rating: 40°F to 180°F (4.4°C to 82.2°C)
• Flow Rate (gpm) Initial ∆P (psi): 0.4 psi @ 1 gpm (0.03 bar @ 3.8 Lpm)
• Flow Rate (gpm) for Chlorine Taste & Odor Reduction: 3,000 gallons @ 1 gpm (11,400L @ 3.8 Lpm)
• Filter Media: Bonded PAC
• End Caps: Polypropylene
• Inner/Outer Wraps: Polyolefin
• Netting: Polyethylene
• Gaskets: Buna-N
• Part Number: 155634-43, EPM-10

Click Here to download manufacture spec sheet