Water Equipment Brands
Categories
- 218Reverse Osmosis Replacement Parts +
- Featured Areas
- 124New Products
- 395Specials
- 14Water Softeners & Conditioners +
- Browse Store
- 15Clearance & Close-Outs
- 35Chemicals & Cleaners
- 22Coolers & Water Bottles
- 8Under Counter Filter Systems
- 40Distillers Water & Essential Oils +
- 1Counter Top Drinking Water Systems
- 198Fittings +
- 28Installation Supplies +
- 5Iron, Manganese & H2S Filter Parts
- 10Leak Detection & Prevention
- 22Media - Bulk
- 45O-Rings
- 5Ozone Systems and Parts
- 28Pressure Tanks
- 43Pump Control Boxes & Drives +
- 71Pump Parts All - Jet & Submersible +
- 26Pumps - Booster, Demand, Delivery
- 10Pumps Jet
- 45Pumps Submersible
- 5Pumps Sump
- 12Reverse Osmosis Systems
- 33Rusco Spin-Down & Trapper Sediment Filters +
- 9Shower Filters & Accessories
- 27Taps & Faucets
- 33Testing Equipment & Supplies
- 20Tools
- 55UV Light Sterilizers +
- 340UV Replacement Parts +
- 51Water Filter Housing Parts
- 70Water Filter Housings & Kits
- 325Water Filters +
- 46Water Filters 20" Standard
- 182Water Filters Big Blue +
- 22Water Filters Hurricane-Jumbo +
- 203Water Softener Parts +
- 5Water Testing
- 88Well System Parts & Installation Supplies +
- 8Whole-House Self-Cleaning Systems
Limited Time Sale!
Happy Customers Since 1989
Thanks! Will happily recommend you to friends."
Product Details
|
Vectapure RO-415 Filter Cartridge Replacement Kit Part # RO415CRK
SKU: RO415CRK
|
Overview
Vectapure RO-415 Filter Cartridge Replacement Kit
Waterite Original factory brand filters.
For Vectapure II RO Model RO-4152H
Complete filter set
Sedi-Carbon Combo Cartridge - PPCC
1 Mic PolySpun - PP1001
Post GAC Carbon - CC5C
Part # RO415CRK
Option to add a membrane and matching flow control valve, from the drop down menu
*the membrane option includes a new external flow control valve (DLFC) to be installed on the drain line. Some years of this ro had an internal flow control (capillary type), if you remove the black drine line from the membrane housing you will see it in the end of the tube. Simpley cut off this end of the tube, one to two inches, reinsert the tube into the membrane housing. Approximatley four inches away from the end near the membrane housing cut the tubing and insert the ends into the built in push fittings on the flow control valve. There is a directional arrow on the valve showing you its orientation to the drain.