ResCare 1oz per day Pro Easy Feeder™ Starter Kit


The Pro Easy Feeder makes it simple to clean and maintain resin beds to peak efficiency and restore the water softeners performance. The feeder is a non-electric, continuous feed dispenser designed for use with Pro Res-Care (included in the kit). When empty, simply replace the old bottle with a new one and insert the wicking cap.

Complete Kit nothing else to buy. A few simple hand tools for installation.

Installation Instructions:
1.     Remove the wick assembly from the box and submerge it underwater until wick is completely saturated.
2.     Remove the brine tank lid and drill two 1/4" holes 2" from top of the brine tank 1  3/8" apart and approximately 6" from the hole for the brine draw tube.
3.     Drill a 1/2" hole in the center of the plastic brine well cap.
4.     Remove cap from the 64 oz. ResCare bottle and hang it on the included mounting bracket.
5.     Remove the wick assembly from the water and insert the knotted end of the tube into the jug, making sure the wick touches the bottom of the jug. Secure the cap. Insert other end of tube completely into the hole in the brine well cap.
6.     The automatic feeding will start in a few hours.

That's it you are finished!