AquaSulis PRO XT 100 Gallon per Day 4 Stage Reverse Osmosis System

Complete with an installation kit and your choice of designer faucet to match your kitchen.

Good water has never been easier than with an AquaSulis Pro reverse Osmosis system. This made in North America reverse osmosis system features industry standard components. Unlike proprietary systems all of the parts, components, filters and membrane are the most widley available and economical ones to be found. This also allows one to easily customize the system to match your water or expand it to match your usage.

Reverse Osmosis is the most effective and economical way to provide your family with the highest quality of drinking water from any source!

Stage 1 - 5 Micron Polypropylene Sediment Filter, by Suez

Stage 2 - Coconut Carbon Pre-Carbon Filter, by Matrix or Omnipure

Stage 3 - 100 Gallon Per Day Membrane (made in USA)

Stage 4 - Coconut Carbon Post Filter, by Matrix or Omnipure

Pure Water Storage in a 5.5 gallon/ 25 Litre AquaSky NSF RO Storage Tank (3 useable gallons on demand)

Your choice of Chrome or Brushed Nickel Designer Faucet by Proflo, or Matte Black by EMP. Stainless Steel & Lead Free Brass Construction, Ceramic Valve

John Guest Fittings & Food Grade Tubing

High Flow 3/8" Tank and Tap Connections

Model ASPRO100RO

Installation:

A complete installation kit is included with every system, JG Feed Valve, Saddle Valve, Faucet Fitting, Tubing.

An instruction booklet is included

You will need a few simple hand tools and a drill (if you are mounting a tap on in a sink area, not if this is just being connected to a fridge)

Our staff are avialble by phone or email to help with any installation questions and guidence you may need.

Operating Recomendations:

Maximum Total Dissolved Solid TFC Membrane 2,000 ppm, (with TDS above 1000 a booster pump is highly recomended or low house pressure in general)
Water Temperature Range 40-95ºF
Water Pressure Range 40-80 psi (a pressure regulator is recommended)
Working pH Range 4.0 to 11
Maximum Manganese 0.05ppm - (exceeding these levels will shorten the membranes life)
Maximum Iron  0.1ppm - (exceeding these levels will shorten the membranes life)
Hydrogen Sulfide should not be present - (carbon pre-filters can be used to reove H2s before the membrane)
The water source should be bacteria free/ potable water