Clack In/Out Distributor Head 1" FNPT for 990S … Read More ›

Discontinued and Replaced by V4144-01 Clack Brine Elbow Assembly Complete for the WS1 and WS1.25 Valves Part # V3330-01… Read More ›

Clack Brine Elbow Assembly with 3/8" Quick Connect fitting, fits the WS1 and WS1.25 Control Valves … Read More ›

Clack By-Pass Valve Assembly for the WS1 and WS1.25 Valves and also used with the NHW by-pass valves and the MAV valves… Read More ›

Clack WS1 & WS1.25 Meter Complete Assembly WS1 Valve Old Part # V3003 New Part # V3003-05… Read More ›

Clack Downflow type piston for the WS1 1" Control Valve Part # V3011… Read More ›

Clack 3/4" Male Drain Elbow Assembly for the WS1 and WS1.25 Valves, 3/4" MNPT Connection Part # V315801 or V3158-01 this is the new improved update version!… Read More ›

Clack Elbow Locking Clip for WS1 & WS1.25 used on both brine and drain elbows… Read More ›

Clack Replacement Electronic Circuit Control Board, for 5 Button CS Models … Read More ›

Clack Replacement Electronic Circuit Control Board, for 4 Button EE & EA Models … Read More ›

Clack Replacement Electronic Circuit Board, for newer 3 Button Time Clock Models … Read More ›

Clack Front Cover for Valves using the EE and EA Boards… Read More ›

Clack In/Out Distributor Head 3/4" FNPT for 890S … Read More ›

Clack In/Out Distributor Head 3/4" FNPT with 1/2" FNPT DI Port for RA201 890S… Read More ›

Clack In/Out Distributor Head 3/4" FNPT with 3/4" FNPT DI Port for 892C… Read More ›

Clack Motor Assembly for WS1 Part # V3107-01… Read More ›

Clack O-Ring # 215, Diagram # 8 used in the bottom of the WS1 valve to seal on a 1" Distributor Rods and also used in the V3006 By-Pass Valves … Read More ›

Clack WS1 DownFlow Valve Rebuild Kit, a handy Clack Wrench Option and all of the injectors listed in the Related Products Tab … Read More ›

Clack regenerant piston for the WS1 1" Control Valve Part # V3174 … Read More ›

Clack Replacement Float Assembly for a PotPerm Feeder Tank - 4oz - Part # H7027-03… Read More ›

Clack Split Ring Fits 1" WS1 Valve - Part # V3150… Read More ›

Clack WS1 Tail Piece Kit, ¾" Brass Sweat Assembly Lead Free, two complete assemblies… Read More ›

Clack Universal Valve Wrench … Read More ›

UpFlow Piston for Clack's WS1 Control Valve Part # V3011-01 or C3011-01… Read More ›

Clack Drive Cap Assembly for the 1" WS1 Control Valve … Read More ›

Clack replacement injector for the WS1 valve, # "A", Color - Black… Read More ›

Clack replacement injector for the WS1 valve, # "F", color - Blue… Read More ›

Clack replacement injector for the WS1 valve, # "B", Color - Brown… Read More ›

Clack replacement injector for the WS1 valve, # "H", Color - Green… Read More ›

Clack replacement injector for the WS1 valve, # "J", Color - Light Blue… Read More ›

Clack replacement injector for the WS1 valve, # "K", Color - Light Green… Read More ›

Clack replacement injector for the WS1 valve, # "I", Color - Orange… Read More ›

Clack replacement injector for the WS1 valve, # "D", color - Red… Read More ›

Clack replacement injector for the WS1 valve, # "C", Color - Violet… Read More ›

Clack replacement injector for the WS1 valve, # "E", Color - White… Read More ›

Clack replacement injector for the WS1 valve, # "G", color - Yellow… Read More ›

Clack WS1 Injector Cap O-Ring #135 Part # V3152… Read More ›

Clack WS1 Injector Cap Part # V3176… Read More ›

Clack WS1 Valve Injector Screen Cage… Read More ›

Clack WS1 Injector Assembly Z Plug Part # V3010-1Z… Read More ›

Clack O-Ring # 215 for the 1" WS1 Control Valve, this is the o-ring between the valve body and the riser rod/distributor … Read More ›

*USED Part* Clack WS1 Power Cord and 120volt AC to 12volt AC Adapter with North American Two Prong Plug Part # V3186, used in some versions of the valve mostly before 2017, check your board face and the sticker on your transformer to be sure… Read More ›

Clack WS1 Power Cord and 120v AC to15v DC Adapter with North American Two Prong Plug, Used in most valves after 2017 but check your board and transformer to be sure of the voltage… Read More ›

Clack Spacer Stack Assembly for the 1" Control Valve Models WS1, WS1TC, WS1CS, WS1CI, WS1EE, WS1EI, WS1SP, and WS1SQ This valve is also used by many companies under their own brand name Part # V3005 … Read More ›

Clack Valve O-ring between the drive cap assembly and the valve body in the WS1 valve head… Read More ›

Waterite Fusion 360 Valve Replacement Electronic Circuit Control Board for versions -02, -04 and -06 … Read More ›

Waterite Fusion2 Valve Replacment Electronic F3CC Control Board Part # V3108CC… Read More ›